Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Second_Gen_Forester_Center_Console_Latch.STL | Primary model | 1.1 MB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Subaru Forester Center Console Latch (2nd Gen, 2002-2007)
Shared by
3DPrintedCarPartDescription
Replaces broken center console latch for 2nd Gen Subaru Foresters. It may also work on other gen's or other models but I don't own one so I cannot confirm. Near 1:1 for the NF4 307P part I pulled out of my car. I didn't optimize this in any way so there really isn't a great way to print it. Worked great anyways. I printed this on a Markforged. I also printed one in solid PLA on my creality cr-10 and it worked fine.
Compatible Cars
Originally published on thingiverse.com by Brandon Sidoti (Dizzy3113) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
