Subaru Forester Cup Holder Adaptor for 24oz Bubba preview

Files (1)

forester_cup_holder_adaptor.stl

STL

142.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
forester_cup_holder_adaptor.stl	Mount / bracket	142.0 KB STL	Slice file	Slice file	Slice file	Ensure proper support structure generation in your slicer for the gap between the two pieces

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Subaru Forester Cup Holder Adaptor for 24oz Bubba

0 downloads18 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA for durability and heat resistance

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports likely, verify in slicer for optimal bridging

Infill

20-30% infill for strength and moderate weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

I got frustrated with how poorly my 24oz Bubba coffee mug fit in my wife's car so I designed an adaptor. Hers is a 2018 Forester but it probably works for 2014-2018 model years and possibly other Subaru vehicles. Support structure designed in but you still need to use supports to bridge the gap between the two pieces for it to work. Category: Automotive.