Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 15% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Cupholder_Right.stl | Choose right variant | 486.1 KB STL | Slice file | Slice file | Slice file | Use PETG / ABS, 4 walls, 15% infill. Pick the matching side before printing. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2021 Subaru Forester Water Bottle Cup Holder
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ABS
Print time
Slice to calculate
Filament
Slice to calculate
Supports
supports unlikely
Infill
10-20% infill with 1.2-1.6 mm walls
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a cup holder insert for a 2021 Subaru Forester (and possibly other Subraru models too) that will fit a 32/40 oz hydroflask water bottle (or other similarly sized 91mm diameter water bottle) without blocking the other cup holder. The inner hole fits a standard 12 oz can or 16 oz soda bottle, up to a 73 mm diameter. UPDATE 5/8/2023: Added fusion 360 files, and new versions (Boot L and Boot R) that should fit a hydroflask with a rubber boot. These have not been tested, as I got rear-ended last year and my Subaru was totaled. The cupholders didn't break though! Print in PETG or ABS for better heat resistance in the warm sun. This doesn't need any supports if you're printer can handle ~50-60 degree overhangs. The default model is for the drivers side cupholder, if you want the passenger side too, just mirror the print so that the corner nub is pointing to the opposite side (see the picture). Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution:.3 Infill: 10 Filament: Overture PETG Notes: make sure to print in PETG or ABS to prevent warping in the sun. If you live in a colder climate, you can get away with PLA. Category: Automotive.
Compatible Cars
Originally published on printables.com by CharlesAhrens · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
2021 Subaru Forester Water Bottle Cup Holder
2014 Subaru Forester cup insert
SUBARU Forester 2015 bottle insert
Subaru Forester SH 2009-2013 Coin Holder
Subaru Forester SG5 cupholder repair kit
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
