Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Cupholder.stl | Mount / bracket | 486.1 KB STL | Slice file | Slice file | Slice file | Verify orientation and support needs in your slicer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2021 Subaru Forester Water Bottle Cup Holder
Shared by
3DPrintedCarPartDescription
This is a cup holder insert for a 2021 Subaru Forester (and possibly other Subraru models too) that will fit a 32/40 oz hydroflask water bottle (or other similarly sized 91mm diameter water bottle). The inner hole fits a standard 12 oz can or 16 oz soda bottle, up to a 73 mm diameter. Print in PETG or ABS for better heat resistance in the warm sun. This doesn't need any supports if your printer can handle ~50-60 degree overhangs. The default model is for the drivers side cupholder, if you want the passenger side too, just mirror the print so that the corner nub is pointing to the opposite side (see the picture).
Compatible Cars
Originally published on thingiverse.com by Charles Ahrens (charlesahrens) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
