Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Subaru Forester JDM "F" logo and XT badge

0 downloads33 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

JDM "F" logo for Forester. This is designed to bolt directly on to the 2009-2013 sport grille with no modifications, even uses the same screws. The XT logo also has holes spaced to fit the sport grille. I used screws roughly 4.5mm x 10mm with washers. I printed these in PETG. I plan to do some finishing, painting, and plenty of clear coat to try and protect them but we'll see how they hold up.