Subaru Forester SH (2009-2012) Door bin - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 20%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Subaru Forester SH (2009-2012) Door bin

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Subaru Forester SH - Door pocket bin. Fits snugly into the door pocket. Store your sweet wrappers, tickets, etc in this handy bin. Push firmly to clip into place under the angled lip of the door pocket..stl provided is for the right side (UK drivers), if you want the left, simply mirror the model in your slicer (pay attention to which direction you mirror!). Print in PETG/ABS etc if you live in very hot climates where PLA may soften in the heat. However for the sunny UK (!) I have found PLA is perfectly fine as its mostly protected from direct sun and heat in the door (used a similar bin in my old Forester for three years no issues). 0.25mm layers, 2 perimeters, 20% infill is fine = roughly a bit less than 5 hour print per bin. Nothing crazy - an easy print. Some overhang on the opening lip but should be within the capability of most printers!