Subaru Impreza Cup Holder Flibbity Jibbit - image

Files (1)

cup-holder-flibbity-jibbit-3-2sided-only.stl

STL

30.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cup-holder-flibbity-jibbit-3-2sided-only.stl	Mount / bracket	30.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal print quality and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Subaru Impreza Cup Holder Flibbity Jibbit

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement flippy-floppy tensioner for the center console cup holder. I came up with this to replace a missing part, so it isn't identical to the OEM part. My impression after the first print, I think the flappers need to be a bit shorter and/or thinner; however, I haven't made any adjustments yet. I have not checked if it will work with other Subaru models' cup holders, but it should work for all Impreza variants from 2007-2011.