Files (1)

93-01_sub_imp_ashtray_cupholder.stl

STL

126.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 15%	100% solid	Recommendation
93-01_sub_imp_ashtray_cupholder.stl	Mount / bracket	126.8 KB STL	Slice file	Slice file	Slice file	Use a larger nozzle for faster printing if possible

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Subaru Impreza rear cupholder

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a cupholder i personally designed to fit right into the ashtray for a 1993-2001 Subaru Impreza mine never came with one i had a parts car that had an ash tray and i thought to myself hey i can make one of those so this is a first attempt if you want to download and print go for it putting support everywhere is my suggestion because those clips that it has are kind of flimsy but im personally using an ender 3 with a big boy 1mm nozzle with black pla filament printing at a temp of 220 with a bed temp of 55 i have tri hexagon support turned on with 10% infill supporting a 40 degree incline angle will probably need to sand the corners down a bunch.