Subaru WRX_Cobb SF Air Box Cover - image

Files (1)

Side.STL

STL

737.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Side.STL	Primary model	737.6 KB STL	Slice file	Slice file	Slice file	Ensure proper fitment with the Cobb SF air box and intake

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Subaru WRX_Cobb SF Air Box Cover

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Due to limitations with the sheet metal used on the stock Cobb SF air box for the Subaru wrx, there is a decent size gap between the intake and the top of the air box (2-3 in^2). This part will line up with the current fasteners and provide a slight increase in coverage. I have not done enough testing at the moment to state any kind of decrease in temperature. Due to the low cost and ease of installation, it seems like its worth investigating. I believe the newer WRX air box (2015+) has eliminated the need for this part. I would eventually like to make this part out of aluminum and will try to upload the dxf files and prints with bend instructions if possible.