Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Subwoofer Mount Adapter Ring - 2008 Honda Civic Si
Shared by
3DPrintedCarPartDescription
This is an adapter ring I designed and printed to fit a Kicker Comp C8 Subwoofer (PN 44CWCD84) into the OEM subwoofer location on my 2008 Honda Civic Si. This particular sub does require some cutting or bending of the metal within the trunk to clear the wire terminals on the sub, even though the magnet will fit within the opening with minimal cutting. This adapter allows the use of Socket Head Cap Screws (M5, IIRC) to fasten for the sub to the adapter, and then the OEM mounting bolts for the adapter to the vehicle chassis. I just ran the SHCS screws for the sub into the holes prior to fastening it together for real.
Compatible Cars
Originally published on thingiverse.com by Michael Cola (MD_Co) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
