Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Sunroof Knob for BMW vehicle
Shared by
3DPrintedCarPartDescription
This is a replacement knob for the crank sunroof on a BMW E30. It may work for other models. I made it to fit my 1985, but I don’t know what other models/years it will fit. This is a spinning version with a glue in collar For installing: dry fit everything, trim and adjust as needed. Make sure that the collar isn't getting pushed down the shaft. For final assembly, start with the collar on the shaft, add a drop of superglue on the outside of the collar then push on the knob. Depending on glue, keep spinning the knob so it doesn't glue to the shaft. Please note, this model doesn't have emblem shown in pictures.
Compatible Cars
Originally published on thingiverse.com by Finger Chili (FingerChili) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
