Support for default center armrest Audi A4 B9 - image

Files (3)

Arm.stl

STL

606.9 KB

Foot.stl

STL

587.2 KB

lock.stl

STL

538.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Arm.stl	Printable file	606.9 KB STL	Slice file	Slice file	Slice file	Use M5x25 screws for assembly as specified
Foot.stl	Printable file	587.2 KB STL	Slice file	Slice file	Slice file	Use M5x25 screws for assembly as specified
lock.stl	Printable file	538.9 KB STL	Slice file	Slice file	Slice file	Use M5x25 screws for assembly as specified

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Support for default center armrest Audi A4 B9

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Everyone who has an Audi with a standard center armrest knows what I'm talking about. This is a support that can be used to raise the standard armrest a little higher. It does not replace the comfort armrest, but is a useful part for the standard one You need four M5x25 screws to assemble it. If you like my work, please buy me a coffee ^^ ![paypal](https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RGQ8NSYPA59FL)