Suzuki Jimny In-Dash GPS - Raspberry Pi - image

Files (7)

jimny_dash_blank_cover.stp

STP

295.8 KB

jimny_dash_cover.stl

STL

15.6 MB

jimny_dash_cover.stp

STP

970.7 KB

jimny_dash_cover_corner_clamp_x4.stl

STL

515.9 KB

jimny_dash_cover_pi_bracket_x2.stl

STL

845.5 KB

jimny_dash_cover_short_clamp.stl

STL

820.4 KB

jimny_dash_cover_straight_clamp_x3.stl

STL

502.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

7 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
jimny_dash_blank_cover.stp	Cover / cap	295.8 KB STP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
jimny_dash_cover.stl	Cover / cap	15.6 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
jimny_dash_cover.stp	Cover / cap	970.7 KB STP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
jimny_dash_cover_corner_clamp_x4.stl	Cover / cap	515.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
jimny_dash_cover_pi_bracket_x2.stl	Cover / cap	845.5 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
jimny_dash_cover_short_clamp.stl	Cover / cap	820.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
jimny_dash_cover_straight_clamp_x3.stl	Cover / cap	502.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Suzuki Jimny In-Dash GPS - Raspberry Pi

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Add In-Dash GPS Navigation to your Suzuki Jimny. Simply remove the passenger airbag, print and replace with this cover. Full details on Instructables | http://www.instructables.com/id/3D-Printed-In-Dash-GPS-Navigation-Raspberry-Pi-3/ I have included a blank cover with no cut-out for an LCD so you can model your own design. Love 3D printing? Love T-Shirts? Then you need to check out steps-per-mm.xyz! It is loaded with a huge range of wearable Parts & Components. Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks:) eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk.