Files (1)

4xKQ0Kuho4q.stl

STL

122.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU 20%	TPU 40%	100% solid	Recommendation
4xKQ0Kuho4q.stl	Primary model	122.5 KB STL	Slice file	Slice file	Slice file	Ensure the hole is slightly enlarged to fit the old retainer pin

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

suzuki vitara 2 fuel cap tether

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

this is an exact fit for the Suzuki Grand Vitara 2 fuel cap. i printed mine in TPU flex filament. you can use the old retainer pin to lock it into the opening, but you have to open up the hole a little bit. " you should install the tether facing towards you ".