Files (2)

Jimny_gearbox_fork_cover.stl

STL

76.5 KB

Jimny_gearbox_fork_cover_reinforced.stl

STL

131.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 80%	100% solid	Recommendation
Jimny_gearbox_fork_cover.stl	Cover / cap	76.5 KB STL	Slice file	Slice file	Slice file	Use ABS / ASA; check sealing faces and verify in slicer.
Jimny_gearbox_fork_cover_reinforced.stl	Cover / cap	131.9 KB STL	Slice file	Slice file	Slice file	Use ABS / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Suzuki Jimny gearbox fork cover

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement for the Suzuki Jimny "M" series gearbox fork cover, there are two STL files, the first is a copy of the OEM part and another which is a reinforced part to help minimise breakage. I recommend printing this model with ABS with 80% infill and 4 perimeters. I also suggest you print these with the tabs facing upwards and with auto supports.