SUZUKI JIMNY BATTERY TERMINAL COVER - image

Files (1)

battery_cover.stl

STL

15.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
battery_cover.stl	Cover / cap	15.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 100–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

SUZUKI JIMNY BATTERY TERMINAL COVER

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made this after breaking the even cheaper plastic positive terminal cover it is a work in progress i printed it at 100% infill fits of the Suzuki battery fuse holder and prevents rubbing on the bonnet.I havent tried it yet but tomorrow i will see if it fits snugly.