Tacoma Bakflip MX4 Drain Adapter - image

Files (1)

truck-bed-drain-adapter.stl

STL

24.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
truck-bed-drain-adapter.stl	Primary model	24.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Tacoma Bakflip MX4 Drain Adapter

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This design is an adapter for the Bakflip MX4 drain tubes to fit the factory bed drains in my Toyota Tacoma (3rd-gen). I didn't want to go drilling large holes in my truck-bed, but wanted to keep it nice and dry. This design did the trick! Images of drain tubes installed with adapter: https://imgur.com/a/qi5CgbB I printed the model on it's side with supports to increase durability. It results in a non-perfect circle opening, but it was close enough for my purposes.