Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| tacoma_SwitchPro.stl | Primary model | 482.0 KB STL | 21g $0.50 | 23g $0.54 | 50g $1.19 | Ensure a brim or raft is used for better adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tacoma Overhead SwitchPros SP-9100 Mount
Shared by
3DPrintedCarPartDescription
Summary This is a overhead mount for a SwitchPros SP-9100 panel. It fits the 3rd generation Tacoma. I had a college lad make the stl for me. I would change a couple of things if I had the ability. I would narrow the print a bit, and make the 2 bosses on the bottom at least a inch deep to aid in mounting the print using a couple of hidden screws on each side. I would also contout the base to match the overhead console. If you make these changes please send me the modified stl for my own use. Thanks.
Compatible Cars
Originally published on thingiverse.com by (HiProof) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
