Tekonsha P3 mount for 3rd gen Tacoma - image

Files (1)

Tekonsha_P3_mount_for_Tacoma.stl

STL

48.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tekonsha_P3_mount_for_Tacoma.stl	Mount / bracket	48.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond to the print bed to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Tekonsha P3 mount for 3rd gen Tacoma

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is for mounting a Tekonsha 90195 P3 trailer brake controller into a 3rd gen Toyota Tacoma. This requires removal of the pocket to the left of the steering wheel and screws into the panel in place of it.

Compatible Cars

Toyota Tacoma

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Garland Wong (mkivsoopra) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.