Files (4)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| DONOTPRINT_TESLA_HITCH_COVER.stl | Cover / cap | 402.4 KB STL | 20g $0.47 | 21g $0.51 | 46g $1.12 | Use PETG / ASA; check sealing faces and verify in slicer. |
| M_RCAP_2IN_INSERT_TESLA.stl | Cover / cap | 101.1 KB STL | 12g $0.30 | 13g $0.32 | 29g $0.70 | Use PETG / ASA; check sealing faces and verify in slicer. |
| M_RCAP_TOP_TESLA.stl | Cover / cap | 184.1 KB STL | 15g $0.36 | 16g $0.39 | 35g $0.85 | Use PETG / ASA; check sealing faces and verify in slicer. |
| RCAP_MIDDLE_TESLA.stl | Cover / cap | 63.5 KB STL | 11g $0.26 | 12g $0.28 | 26g $0.62 | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla 2-color Hitch cover for 2 inch receiver
Shared by
3DPrintedCarPartDescription
This is a 3 piece Tesla Hitch cover with an insert for 2 inch receiver. Note that the insert has to be glued properly for it to work robustly outside without falling off. In my own printout, I used a glow in the dark PLA for the middle white layer and a solid black ABS for the other two pieces. In theory you can use any combination of colors that matches your own car. After assembly, I sprayed on a layer of polyurethane for a glossier finish. In my own print, the fittings are a bit tight so if you paint them separately, be prepared to do some touch up to remove paint from the middle.
Compatible Cars
Originally published on thingiverse.com by Indy L (indyToronto) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
