Tesla Model 3/S/X Wheel Center Cap - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Tesla Model 3/S/X Wheel Center Cap

0 downloads33 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Wheel center caps for the Tesla Model 3. Snap right into the stock 18" wheels, once you take the aero covers off. The test cap --- the one with the hole in the middle --- is so you can easily remove the cap without taking off the wheel. That way you can print one to check the calibration of your printer and make any scale adjustments if necessary.