Files (2)

Tesla_M3_Cover_v1.stl

STL

28.8 KB

Tesla_M3_Cover_v1.stp

STP

60.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_M3_Cover_v1.stl	Cover / cap	28.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Tesla_M3_Cover_v1.stp	Cover / cap	60.4 KB STP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Tesla Model 3 Tow Hook Cover

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a work in progress, version 1 is OK but not perfect, good enough to cover the hole and stay in place. It was done in a bit of a hurry and printed at very coarse settings with an 0.6mm nozzle and PETG because that was what was in the printer at the time.