Tesla Model 3 Trailer Hitch Cover 2020 - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Tesla Model 3 Trailer Hitch Cover 2020

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

tesla Model 3 2019 and 2020 years have a hatch that can be removed when adding a trailer hitch. This leaves a large hole. 2 options, cut your hatch and buy a new one when not using the hitch or print one. This fits around the Torklift 1 1/4 inch hitch. Model 7374. Unsure about 7373, but would most likely work on that one as well. This is a work in progress, it is not perfect, but it does cover the hole leaving minimal area open. I have included 3d printed 1/4 bolts. I am unsure if these will be strong enough. I am testing them now.