Tesla Model 3 Rear License Plate Anchors - image

Files (1)

lp2.stl

STL

105.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
lp2.stl	Primary model	105.9 KB STL	Slice file	Slice file	Slice file	Print with a raft for better adhesion and easy removal

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Tesla Model 3 Rear License Plate Anchors

0 downloads28 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

An anchor which fits into the rear license plate mounting holes of a Tesla Model 3. The screws which came with the original license plate frame can be used. The diameter of the screw hole is 5 mm and it tapers slightly to allow for expansion when the screw is inserted into the anchor. No supports are required. Printed on a raft. No guarantees on the structural integrity or lifetime of the anchors. Use at your own risk!