Files (2)

Tesla_Cable_Organizer_With_Logo.stl

STL

1.8 MB

Tesla_Wall_Mount.stl

STL

882.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_Cable_Organizer_With_Logo.stl	Printable file	1.8 MB STL	Slice file	Slice file	Slice file	Scale the wall mount as needed for a proper fit.
Tesla_Wall_Mount.stl	Mount / bracket	882.1 KB STL	Slice file	Slice file	Slice file	Scale the wall mount as needed for a proper fit.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tesla Cable Organizer With Logo

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Added the Tesla logo to the front of @jakepoz's organizer. Unfortunately, I did this after I printed mine (it's a long print), so I will likely not reprint just for the logo. When I printed this, I had to scale down the wall mount a bit for it to fit correctly.