Tesla Model S/X Sunglasses holder - image

Files (1)

Body13.stl

STL

134.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Body13.stl	Primary model	134.5 KB STL	Slice file	Slice file	Slice file	Ensure the notch is the correct size for your sunglasses before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tesla Model S/X Sunglasses holder

0 downloads60 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A 3D printable sunglasses holder for your Tesla Model S/X*. Attach this to the roof lining, above the rear view mirror and between the glass for the sunroof. Then you can stick your sunglasses in the notch! Note, please make sure your sunglasses fits in the notch before printing. If it doesn't you may need to make the notch deeper. *This might work on the Model 3. I don't have a 3, I have an S, so I have no way of telling. If you have a 3, print this out and tell me if it works!