Tesla J1772 Adapter Charger Plug Holder - image

Files (1)

Tesla_Wall_Holder_J1772.stl

STL

66.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_Wall_Holder_J1772.stl	Mount / bracket	66.8 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for improved adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tesla J1772 Adapter Charger Plug Holder

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I liked Gizmotoy's rounded plug holder (based off of jakepoz's non-rounded plug holder), but it doesn't fit Tesla's J1772 adapter, which is much thicker a little too close to the tip to fit. This gives a little extra room for a J1772 with attached adapter to fit, so you don't have to keep pulling the adapter off.