Tesla Model S Enclosed Charger Holder - image

Files (2)

tesla_dock_peaked_roof_v2.stl

STL

343.3 KB

tesla_dock_rounded_roof_v2.stl

STL

372.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tesla_dock_peaked_roof_v2.stl	Printable file	343.3 KB STL	Slice file	Slice file	Slice file	Ensure a secure fit to protect the charger from the elements
tesla_dock_rounded_roof_v2.stl	Printable file	372.8 KB STL	Slice file	Slice file	Slice file	Ensure a secure fit to protect the charger from the elements

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tesla Model S Enclosed Charger Holder

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Remixing Jakepoz's Tesla Model S charger to give your plug a little more protection from the elements. I've enclosed it and added a roof to prevent water from collecting in the connector. Warning: This is not immune to weather. Use carefully and at your own risk.