Tesla Charger Large Side Screw Covers - image

Files (2)

Tesla_Wall_Charger_Large_Left_Screw_Cover.stl

STL

1.3 KB

Tesla_Wall_Charger_Large_Right_Screw_Cover.stl

STL

1.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_Wall_Charger_Large_Left_Screw_Cover.stl	Choose left variant	1.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Tesla_Wall_Charger_Large_Right_Screw_Cover.stl	Choose right variant	1.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Tesla Charger Large Side Screw Covers

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Damaged original back plate for 2nd Edition Wall Charger, created new rear bracket (see other upload). This is the large side screw cover for the wall charger. Two separate files for right and left-hand side and top is slightly angled.