Files (2)

HalterDueseV1.2.stl

STL

86.1 KB

Schlauchhalter.stl

STL

143.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
HalterDueseV1.2.stl	Printable file	86.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal strength and minimal supports
Schlauchhalter.stl	Printable file	143.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal strength and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Tesla wiper nozzle Alternative

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an alternative to the standard Tesla Model S wiper nozzle, using Mercedes Standard Equipment as follows: 2 DUESE (Mercedes) OE-Nr: A6318690047 2 SCHLAUCH (Mercedes) OE-Nr: A6319974082 2 ANSCHLUSSTUECK (Mercedes) OE-Nr: A6318690024 This is an Adapter for the OE-Nr: A6318690047 to fit on to the bigger Tesla wiper arm.