chargermount.stl

STL

74.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
chargermount.stl	Mount / bracket	74.2 KB STL	Slice file	Slice file	Slice file	Print with the mounting holes facing upwards for easy screw access

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla charger wall mount

0 downloads38 views0 likes

Shared by

Verified

Description

A simple mount for the Tesla car charger. To be screwed into the wall with two 3.5 or 4mm screws. To be printed upright without supports.

Published Jul 1, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Davy Loots (davloots) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.