Files (1)

Tesla_charger_holster.stl

STL

123.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_charger_holster.stl	Primary model	123.7 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Tesla Charging Connector Holder

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Tesla charging cable holder. This is a remix that adds some features and makes it more functional for outdoor use. This holder covers the back to better protect from rain and a sloped cover for a little extra protection from the elements. There's also a Tesla logo above the dock, and the top and bottom of the holder are rounded to reduce sharp edges.