Tesla Gemini wheels lug nut cap removal tool - image

Files (1)

Tesla_Gemini_lug_nut_cap_tool_v1.stl

STL

285.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_Gemini_lug_nut_cap_tool_v1.stl	Cover / cap	285.6 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Tesla Gemini wheels lug nut cap removal tool

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This print is a tool to remove lug nut caps that are inside a tight hole. I print these lug nut caps for my Tesla Model Y with Gemini wheels. Due to the wheels geometry, the space between the caps and the wheel is too tight to insert pliers to remove the caps.