Files (1)

tesla_cover_v2.stl

STL

1.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tesla_cover_v2.stl	Cover / cap	1.2 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Tesla giraffe cover RevB

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a cover for the baby tesla giraffe created by kalud over on comma.slack.com #giraffe This is a Tesla Giraffe designed to enclose PCD board. the board connects OBD to comma Panda which allows the signals to be passed from EON to control Steering of the Tesla.