Tesla J1772 Charger Adapter Lock - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Tesla J1772 Charger Adapter Lock

0 downloads26 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a handy model to prevent someone from unplugging your car while charging at lvl2 stations like Chargepoint Chargers. If you have had this happen to you, you know how annoying and frustrating it can be. Charge like you normally would but before you plug it into your car, slide this adapter lock on. Enjoy the model! 12/10/19 - per request I added a modified lock that where the locking latch is 8mm taller to accommodate more chargers 1/18/20 - per request I added a modified lock where the ring is thinner beneath the locking latch to accommodate more chargers.