Files (4)

bottom_4JUL2021.stl

STL

742.0 KB

cutaway_4JUL2021.stl

STL

1.8 MB

knob_4JUL2021.stl

STL

730.8 KB

top_4JUL2021.stl

STL

1021.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 90%	100% solid	Recommendation
bottom_4JUL2021.stl	Printable file	742.0 KB STL	Slice file	Slice file	Slice file	Check final orientation and support decisions in your slicer
cutaway_4JUL2021.stl	Printable file	1.8 MB STL	Slice file	Slice file	Slice file	Check final orientation and support decisions in your slicer
knob_4JUL2021.stl	Printable file	730.8 KB STL	Slice file	Slice file	Slice file	Check final orientation and support decisions in your slicer
top_4JUL2021.stl	Printable file	1021.8 KB STL	Slice file	Slice file	Slice file	Check final orientation and support decisions in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Tesla Jack pad case

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I got the idea from https://www.thingiverse.com/thing:3726158. It didn't fit my jack pads so I made a similar design using OpenSCAD. PETG or ABS is recommended since the print needs to be heat resistant. Jack Pads: I purchased from Ebay at https://www.ebay.com/itm/273710639030 Printing: Cutaway: Only for an example of internal detail.. Don't print this. Top: You may want supports for the center but it'll probably be OK without them. I used selective 90% infill around the screw connection but 15% infill elsewhere. Bottom: Supports not required. I used selective 90% infill around the nut pocket but 15% infill elsewhere. A 1/4-20 nut slides in the pocket to add threads. Knob: Supports not required. Holds a 1/4-20 x 1" bolt for tool free attachment of top cover. I used selective 90% infill around the bolt head but 15% infill elsewhere.