Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG 20% | PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tesla_airpods_adapter.stl | Primary model | 45.9 KB STL | Slice file | Slice file | Slice file | Ensure the model is oriented to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 AirPods wireless charger adapter (lid-friendly)
Shared by
3DPrintedCarPartDescription
I have modified the original by slyice (thanks, I love the design!), leaving out a part of the top that seemed redundant to me. Also I have reduced the thickness, which allows the lid to close when AirPods are not present. This allows you to leave the adapter in place and close the lid (the AirPods themselves are too wide to allow the lid to close properly). Possibly it can hold AirPods Pro on its side, but it may be necessary to alter the width. Your mileage may vary;).
Compatible Cars
Originally published on thingiverse.com by Pierz Piersma (Morsputativ) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
