Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tesla_Model_3_Towing_cover_fastener.stl | Cover / cap | 1.9 MB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 Trailer Hitch Cover Fasteners (European Version)
Shared by
3DPrintedCarPartDescription
If you get tired of looking for a coin every time you want to mount the trailer hitch quickly then this is exactly your solution! The parts fit at least the European Tesla Model 3 cars. There are already other versions on Thingiverse, on this model you have a big handle, so you can loosen the screw even in cold weather and with clammy fingers. You can also use the handle to pull down the lid in one step.
Compatible Cars
Originally published on thingiverse.com by Steve Helwin (cariocadagema) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
