Tesla Model 3 Angle adapter trailer hitch remix - image

Files (2)

adapter_seal.stl

STL

301.8 KB

angle_adapter_180.stl

STL

795.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
adapter_seal.stl	Printable file	301.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing and minimal supports
angle_adapter_180.stl	Printable file	795.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Tesla Model 3 Angle adapter trailer hitch remix

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The original model works fine as it is but it seems some of the plugs have the threads positioned differently and screwing them on tightly positions the plug wrong way. So I did a simple remix, rotated the threaded neck 180 degrees. Also modeled a gasket part, not sure if it actually helps that much. Well it let's me use flex filaments:) OpenSCAD sources here: https://github.com/spegelius/3DModels/tree/master/Tesla_Model_3_Angle_adapter_for_trailer_hitch_remix