Files (10)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Center_Console.stl | Printable file | 109.1 KB STL | Slice file | Slice file | Slice file | Use a heat-resistant material for the bin due to potential high temperatures in the car |
| Center_Console_Wallet_Slots.stl | Printable file | 109.1 KB STL | Slice file | Slice file | Slice file | Use a heat-resistant material for the bin due to potential high temperatures in the car |
| Center_Console_with_Wallet_Slots.stl | Printable file | 109.1 KB STL | Slice file | Slice file | Slice file | Use a heat-resistant material for the bin due to potential high temperatures in the car |
| Modified_Wallet_Club.stl | Printable file | 104.3 KB STL | Slice file | Slice file | Slice file | Use a heat-resistant material for the bin due to potential high temperatures in the car |
| Modified_Wallet_Misc.stl | Printable file | 107.2 KB STL | Slice file | Slice file | Slice file | Use a heat-resistant material for the bin due to potential high temperatures in the car |
| Modified_Wallet_Punch.stl | Printable file | 103.0 KB STL | Slice file | Slice file | Slice file | Use a heat-resistant material for the bin due to potential high temperatures in the car |
| Modified_Wallet_Transpo.stl | Printable file | 142.5 KB STL | Slice file | Slice file | Slice file | Use a heat-resistant material for the bin due to potential high temperatures in the car |
| Wallet_Cap.stl | Cover / cap | 135.5 KB STL | Slice file | Slice file | Slice file | Use PETG / ABS; check sealing faces and verify in slicer. |
| Wallet_Case_Slim.stl | Printable file | 52.9 KB STL | Slice file | Slice file | Slice file | Use a heat-resistant material for the bin due to potential high temperatures in the car |
| Wallet_Lever.stl | Printable file | 2.9 MB STL | Slice file | Slice file | Slice file | Use a heat-resistant material for the bin due to potential high temperatures in the car |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 Center Console Tray & Card Wallets
Shared by
3DPrintedCarPartDescription
This container goes into the center console of the Tesla Model 3, behind the mobile phone storage and in front of the cup holders. I typically have a bunch of disorganized frequent customer/club cards, punch cards, EV charging cards, metro cards in various business card or card cases in my car. This combines Petland Design's Slim Wallet with jonco223's Tesla Model 3 Center Console Bin. I recommend printing at least the bin in ABS or some heat resistant material. The Tesla Model 3 does have cabin overheat protection, keeping the temp at 104°F or lower, but as that zaps a lot of juice, I'll probably turn it off or turn it to fan only, so expect it to get hot enough to deform PLA. I printed the wallets in PLA, as the mechanisms are more sensitive to shrinkage. Hopefully, they'll be fine in the console. Wallet Case Slim is a default wallet case, while the other Wallet Case files have text written on the side for my own use. Use a small piece of 1.75mm filament for the hinge pin. A dab of superglue on the end will keep it in place.
Compatible Cars
Originally published on thingiverse.com by Jose Gil (SodaPopin5ki) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
