Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| JYConsoleSolid.stl | Primary model | 9.4 MB STL | Slice file | Slice file | Slice file | Ensure proper fit by checking the model's dimensions against your Tesla Model 3's center console |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 Center Console Tray w/ J1772 Adapter Slot + card slot (no coin slot)
Shared by
3DPrintedCarPartDescription
Remix of Options's remix (with the J1772 adapter) - https://www.thingiverse.com/thing:3187713 I don't use coins in my car, so I removed the coin slot (to the best I could, new at this). Also added in a slot on the top end for credit cards and/or gum. Fit is a tad tight (it requires a solid pull to remove), but it is cold now. Might be worth shaving some off the edges for expansion in warmer temps. Print with ABS.
Compatible Cars
Originally published on thingiverse.com by Jeffrey Yeung (jbyeung) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
