Tesla Model 3 deep/tall center tray - image

Files (1)

Model3_center_TallTray_-_tall_tray.stl

STL

1.7 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Model3_center_TallTray_-_tall_tray.stl	Primary model	1.7 MB STL	Slice file	Slice file	Slice file	Ensure a large enough print bed (at least 180mm x 140mm) to accommodate the model

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Tesla Model 3 deep/tall center tray

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

(YACT: Yet Another Center Tray) Deep tray for Tesla center console. Has vertical pockets for sunglasses and reading glasses; two large pockets for curved/sculpted glasses, and one for flat-folding glasses, e.g.readers. You may want to flock, or line with fleece or felt or microfiber. Note that this is a very large print -- 173mm x 136mm x 151mm tall.