Tesla Model 3 Door Handle Rubber Spacer - image

Files (1)

Tesla_Model_3_Door_Handle_rubber_spacer.stl

STL

45.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU 20%	TPU 15%	100% solid	Recommendation
Tesla_Model_3_Door_Handle_rubber_spacer.stl	Primary model	45.1 KB STL	Slice file	Slice file	Slice file	Print as slow and cool as possible to minimize layer delamination

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Tesla Model 3 Door Handle Rubber Spacer

0 downloads48 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

On one of my door handles this rubber spacer was missing. The door handle was not flat on the car body and looked a bit strange. So I quickly designed this replacement part in tinkercad. Printing: Print with TPU, as slow and cool as possible (check for layer delamination) My best settings were: 200°C 10mm/s print speed 15% infill The print only takes 5 minutes.

Compatible Cars

Tesla Model 3

Updated Jul 15, 2026

Originally published on thingiverse.com by Jan Suckrow (BlueM455) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.