Files (2)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tesla_Door_Handle_Prop.stl | Printable file | 307.0 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| Tesla_Door_Handle_Tool.stl | Printable file | 43.1 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model S Door Handle Fix/Prop for Non-Retracting Handles
Shared by
3DPrintedCarPartDescription
The Model S's retracting door handles, particularly the early revisions, are notorious for failing. If your Model S door handle stops retracting, you can attach this to it to use your door until it is fixed. Directions: 1. Use the tool to pry your Model S handle out from the vehicle. 2. Fit the big loop of the plastic prop over the top side of the handle. 3. Use the tool to pry the small loop of the prop beneath the bottom of the handle, and release it in place. It's easiest to do this by working edge to edge rather than all at once.
Compatible Cars
Originally published on thingiverse.com by Robby Grossman (freerobby) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
