Files (3)

TeslaDoorHandle.stl

STL

334.8 KB

tesladoorhandle_hires.obj

OBJ

1.7 MB

tesladoorhandle_lowpoly.obj

OBJ

97.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

3 model files

Typical selected file

38g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.92

Filament only at roughly $24/kg PETG / ASA

Print time

1.1h–1.8h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
TeslaDoorHandle.stl	Printable file	334.8 KB STL	18g $0.44	20g $0.48	43g $1.04	Ensure a strong adhesion to the print bed to prevent warping
tesladoorhandle_hires.obj	Printable file	1.7 MB OBJ	35g $0.84	38g $0.92	84g $2.01	Ensure a strong adhesion to the print bed to prevent warping
tesladoorhandle_lowpoly.obj	Printable file	97.7 KB OBJ	12g $0.29	13g $0.32	29g $0.70	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Tesla Door Handle

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a handle for http://www.thingiverse.com/thing:2197935. Prints beautify and attaches to the remix I uploaded. There are two other files in obj format for you to modified for your own tray design.