Tesla Model 3 European towing cover screws / fixings / fasteners - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla Model 3 European towing cover screws / fixings / fasteners

0 downloads32 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

A solution to a minor niggle I had using the towbar on a European Model 3 which has an access hatch under the back of the car for the quick hitch. I use the towball quite a lot and the slot in the cover retaining screws were getting chewed up as the most convenient thing to hand was usually the small red key for the tow hitch lock. This part is a direct replacement for the Tesla OEM fastners which are easily removed and then you can work these ones with your fingers. I've printed them in PLA and they seem to be working fine so far but for long term use I expect that ABS is better.