Tesla Model 3 Front Mud-Guards - Square Nuts + M3x10mm Screws - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Fenders

Tesla Model 3 Front Mud-Guards - Square Nuts + M3x10mm Screws

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Remixed "Tesla Model 3 Mud-guards front" by olkal https://www.thingiverse.com/thing:3900366. Use this original link to learn more about these mud-guards including installation instructions. I didn't have standard M3 hex nuts or M3x8mm screws available, so I remixed the design by (1) increasing the thickness of the "backplate" pieces by 2mm to accommodate M3x10mm screws and (2) modified the nut slots to accommodate M3 square nuts. There is plenty of gap between the wheel well liner and the body panel that these mud-guards clamp onto, so the added 2mm thickness to the backplate shouldn't be an issue. Worked for me! Also found at: https://www.prusaprinters.org/prints/37199-tesla-model-3-front-mud-guards-square-nuts-m3x10mm ☕ Fuel More Like This! ☕ If you liked this model and found it useful, please consider buying me a coffee to fuel creating and sharing more designs with the community: https://ko-fi.com/blaker9410 Thank you! -Blake.