Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| glass_holder_v4.stl | Mount / bracket | 1.6 MB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping |
| wheel_mount_v7.stl | Mount / bracket | 7.7 MB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 GPS-based HUD mount
Shared by
3DPrintedCarPartDescription
I built a simple Head-Up Display for my Tesla Model 3 using a Raspberry Pi and a GPS antenna, to display the current speed and heading in the driver's line of straight. There are two STLs: * wheel-mount: mount to place a 7-inch monitor on the steering column * glass-holder: mount to place a beamsplitter mirror on the dashboard More details, including the source code used, are on GitHub.
Compatible Cars
Originally published on thingiverse.com by Pavan Pamidimarri (pavankp) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
