Tesla Model 3 Jack Pad - stackable with text - image

Files (1)

Tesla_Model_3_jack_pad.stl

STL

1.6 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_Model_3_jack_pad.stl	Primary model	1.6 MB STL	Slice file	Slice file	Slice file	Ensure a stable and level print bed for accurate printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Tesla Model 3 Jack Pad - stackable with text

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Please customize it as you want and take measure before (openscad). This item was not tested (as Tesla Model 3 is not yet arrived in Europe at the time of creation). Description of vars: - "interior" means the cylinder that will fit inside the car - "base" means the cylinder that will push the car up (will be completely filled except for the whole to stack them together) - "elastic" is a small place for putting an elastic so that it will stay on place easily --------------------------------------------------------------------------------- Merci de paramétrer selon vous souhaits et tests (openscad). Celui-ci n'a pas encore été testé au moment de la création (Model 3 Européenne en attente). Description des variables: - "interior" désigne le tube qui vient s'enfoncer dans le trou sous la voiture - "base" désigne le cylindre qui va servir au levage de la voiture avec un cric ou autre (celui-ci devra être plein sauf pour la partie servant a l'encastrement pour le rangement) - "elastic" désigne une petite coupure du tube "interior" qui va servir a retenir un élastique pour permettre a la pièce de ne pas tomber lors de la mise en place.