Basket.stl

STL

6.3 KB

Organizer.stl

STL

313.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Basket.stl	Accessory piece	6.3 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Organizer.stl	Printable file	313.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for optimal strength and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla Model 3 Rear Center Console 120v Outlet Inverter Mount

0 downloads33 views0 likes

Shared by

Verified

Description

I thought the Model 3 should come with 120V outlets for charging tablets, computers, Onewheels, and scooters. I also wanted a couple more USB A jacks so i designed a mount that holds a 300W inverter that replaces the rear center console organizer. This is meant to hold the 300 Watt inverter, J1772 adapter, and still has some space for your things. It was designed with this product in mind: https://www.amazon.com/BESTEK-300W-Power-Inverter-Adapter/dp/B004MDXS0U/ref=sr_1_5?crid=2WM339VDDQQNA&dchild=1&keywords=bestek+300w+power+inverter&qid=1610223562&sprefix=bestek%2Caps%2C158&sr=8-5